Difference between revisions of "Lift"

Let's take Newton and Bernoulli into the questions! It helps new readers to get a clear introduction without delving into the already confused explanations they might have heard.
Placing the article under review for further improvements.
Line 1: Line 1:
[[Category: Physics]]
+
[[Category: Physics]]{{Under review}}
 
== Explanation ==
 
== Explanation ==
 
Lift is a [[force|mechanical force]] induced on an [[airfoil]] of an [[aircraft]] when the body moves through the air. The incoming stream of air, when it encounters the wings, it gets turned downwards due to the shape and angle of the wing. As the wing exerts a force on the incoming air, an equal amount of force is applied by the stream of air onto the wing in the opposite direction. The resultant aerodynamic force gets resolved into two components. The vertical component that lifts the airplane, countering the weight is called as the lift and the horizontal component that opposes the forward motion of the aircraft is called as [[drag]].
 
Lift is a [[force|mechanical force]] induced on an [[airfoil]] of an [[aircraft]] when the body moves through the air. The incoming stream of air, when it encounters the wings, it gets turned downwards due to the shape and angle of the wing. As the wing exerts a force on the incoming air, an equal amount of force is applied by the stream of air onto the wing in the opposite direction. The resultant aerodynamic force gets resolved into two components. The vertical component that lifts the airplane, countering the weight is called as the lift and the horizontal component that opposes the forward motion of the aircraft is called as [[drag]].

Revision as of 17:32, 12 November 2016

This is a developing content and needs to be reviewed. Help Swyde by improving the content and participating in the discussions.

Explanation

Lift is a mechanical force induced on an airfoil of an aircraft when the body moves through the air. The incoming stream of air, when it encounters the wings, it gets turned downwards due to the shape and angle of the wing. As the wing exerts a force on the incoming air, an equal amount of force is applied by the stream of air onto the wing in the opposite direction. The resultant aerodynamic force gets resolved into two components. The vertical component that lifts the airplane, countering the weight is called as the lift and the horizontal component that opposes the forward motion of the aircraft is called as drag.

Lift is the vertical component of the total aerodynamic force.

Frequently Asked Questions

How lift is generated?

In aerodynamics, lift is generated when a streamlined object like an airfoil or a thin plate moves through the air at a certain angle. This can be understood with newton’s third law of motion and Bernoulli’s principle. When the airflow encounters the leading edge of the wing, the flow is turned downward due to the shape of the airfoil. This interaction itself produces an equal amount of aerodynamic force on the wing, which gets resolved as lift and drag as discussed in the explanation section. Further down, the air that moves on the top side of the wing is faster than that of the air on the bottom side.

✘ Misconception
The air above the airfoil takes the same amount of time as that of the air below the airfoil to reach the trailing edge. This is usually referred to as the equal transit time theory of lift. But this is a very common misconception of the lift theory.[1]
✔ Fact
Experiments have shown that the air particles above the surface of the wings, in fact, travel faster than the air below, and the particles do not meet at the trailing edge. However, in the case of symmetrical airfoil, due to the characteristic shape of it, the equal transit theory holds good at a zero angle of attack.

According to Bernoulli’s principle, this variation in velocities on either surface of the wings create a pressure difference that results in an aerodynamic force. Due to the shape of the airfoil, the lift component is higher than the drag component. But the primary contribution to the lift is due to the characteristic effect of the third law of motion.

How lift is generated when the airplane is upside down?

In most airplanes that are capable of flying inverted, the airfoil would be a symmetrical airfoil that is capable of producing lift in that position. So in an inverted airplane with a symmetrical airfoil, when the pilot pushes the control stick the angle of attack would decrease and produce a negative lift relative to the normal orientation of the plane, but in reality, it would be creating a positive lift as it is flying inverted.

References

  1. https://www.grc.nasa.gov/www/k-12/airplane/wrong1.html